McAlpine Universal Slip Tee 1.5 Inch x 1.5 Inch 1.5 Inch Slip Tee with Universal Connections.
by McAlpine Plumbing Products
McAlpine Universal Slip Tee 1.5 Inch x 1.5 Inch 1.5 Inch Slip Tee with Universal Connections.
by McAlpine Plumbing Products
Plastic & Chrome Fittings - Multifit Waste FittingsMcAlpine Universal Slip Tee.
1.5 Inch x 1.5 Inch x 1.5 Inch Slip Tee.
Colour White.
Manufactured in Polypropylene.
Multifit Connections.
Most McAlpine Trap Outlets and Fittings have Multifit Connections.
Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
The moulded Internal Sleeve of the Connection centres and supports the pipe.
The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting.
When the compression nut is turned hand tight, the best possible mechanical joint is complete.
If a plastic pipe is undersize or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
For technical reasons it is not possible to manufacture Multifit Connections on all traps and fittings.
Where Multifit is not provided, the description Universal is applied.
The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.
1.5 Inch x 1.5 Inch x 1.5 Inch Slip Tee.
Colour White.
Manufactured in Polypropylene.
Multifit Connections.
Most McAlpine Trap Outlets and Fittings have Multifit Connections.
Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
The moulded Internal Sleeve of the Connection centres and supports the pipe.
The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting.
When the compression nut is turned hand tight, the best possible mechanical joint is complete.
If a plastic pipe is undersize or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
For technical reasons it is not possible to manufacture Multifit Connections on all traps and fittings.
Where Multifit is not provided, the description Universal is applied.
The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.
- Brand Name : McAlpine
- Product ID Number : V1MX
- Typical Building Sector : Commercial,Dom
- Typical Use : Condensate Traps and Fitti
- Colour : White
- Finish(es) : White Plastic
- Material : Polypropylene
- Diameter (inches) : 1.5 inches
- Height : 91 mm
- Length : 111 mm
There are 9 files available to download including: Brochures, Images, Operations & Maintenance, Other, Specifications and Technical Files.
Similar Products inWaste Fittings
Product Description
Plastic & Chrome Fittings - Multifit Waste FittingsMcAlpine Universal Slip Tee.
1.5 Inch x 1.5 Inch x 1.5 Inch Slip Tee.
Colour White.
Manufactured in Polypropylene.
Multifit Connections.
Most McAlpine Trap Outlets and Fittings have Multifit Connections.
Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
The moulded Internal Sleeve of the Connection centres and supports the pipe.
The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting.
When the compression nut is turned hand tight, the best possible mechanical joint is complete.
If a plastic pipe is undersize or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
For technical reasons it is not possible to manufacture Multifit Connections on all traps and fittings.
Where Multifit is not provided, the description Universal is applied.
The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.
1.5 Inch x 1.5 Inch x 1.5 Inch Slip Tee.
Colour White.
Manufactured in Polypropylene.
Multifit Connections.
Most McAlpine Trap Outlets and Fittings have Multifit Connections.
Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
The moulded Internal Sleeve of the Connection centres and supports the pipe.
The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting.
When the compression nut is turned hand tight, the best possible mechanical joint is complete.
If a plastic pipe is undersize or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
For technical reasons it is not possible to manufacture Multifit Connections on all traps and fittings.
Where Multifit is not provided, the description Universal is applied.
The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.
Specification Details for McAlpine Universal Slip Tee 1.5 Inch x 1.5 Inch 1.5 Inch Slip Tee with Universal Connections. (Waste Fittings)
| Size & Weight | ||
| Diameter (inches) (?) | 1.5 inches | |
| Height (?) | 91 mm | |
| Length (?) | 111 mm | |
| Weight (?) | 0.1083 kg | |
| Width (?) | 64 mm | |
| Other | ||
| EAN (?) | 5036484005588 | |
| Uniclass Code (?) | Pr_65_52 | |
| Uniclass Name (?) | Pipe,tube and fitting products | |
| Commercial | ||
| Brand Name (?) | McAlpine | |
| Product ID Number (?) | V1MX | |
| Typical Building Sector (?) | Commercial,Domestic,Healthcare,Hospitality,Leisure,Sports | |
| Typical Use (?) | Condensate Traps and Fittings | |
| Materials & Finishes | ||
| Colour (?) | 白色 | |
| Finish(es) (?) | 白色Plastic | |
| 材料(?) | Polypropylene | |
McAlpine Plumbing Products
Kelvin Avenue, Hillington
Glasgow
Scotland
G52 4LF
McAlpine Universal Slip Tee 1.5 Inch x 1.5 Inch 1.5 Inch Slip Tee with Universal Connections.
Kelvin Avenue, Hillington
Glasgow
Scotland
G52 4LF
McAlpine Universal Slip Tee 1.5 Inch x 1.5 Inch 1.5 Inch Slip Tee with Universal Connections.
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended thatMcAlpine Plumbing Productsis consulted before specifying.
File Downloads for McAlpine Universal Slip Tee 1.5 Inch x 1.5 Inch 1.5 Inch Slip Tee with Universal Connections.
Compare McAlpine Universal Slip Tee 1.5 Inch x 1.5 Inch 1.5 Inch Slip Tee with Universal Connections. with similar Waste Fittings
| Commercial | |||
| Product ID Number | V1MX | CBP-OLI-RGR | CBP-CAP-DCNG-C-DCNG-D |
| Brand Name | McAlpine | - | - |
| Typical Use | Condensate Traps and Fittings | - | - |
| Typical Building Sector | Hospitality, Domestic, Sports, Commercial, Leisure, Healthcare | - | - |
| Materials & Finishes | |||
| Colour | 白色 | Grey | Grey |
| Finish(es) | 白色Plastic | - | - |
| Material | Polypropylene | - | - |
| Size & Weight | |||
| Width (mm) | 64 | 102 | 102 |
| Length (mm) | 111 | 215 | 215 |
| Diameter (inches) (inches) | 1.5 | - | - |
| Height (mm) | 91 | - | - |
| 体重(公斤) | 0.1083 | - | - |
| Other | |||
| Uniclass Code | Pr_65_52 | Pr_20_93_52 | Pr_20_93_52 |
| Uniclass Name | Pipe, tube and fitting products | Masonry walling units | Masonry walling units |
| EAN | 5036484005588 | - | - |
Contact
Contact
Contact